Maytag PD Guía para resolver problemas

SMART VEND PR & PR/PD & SLIM TROUBLESHOOTING GUIDE MAYTAG CIRCUIT BOARD The Maytag Circuit Board Interface The Maytag CompuTrac Circuit Boar

ERROR MESSAGES CARD ERROR 01 1. Bad site code or site code is not loaded into the reader. Either load the site code into the reader for

CARD ERROR 51 1. Card authentication failed. Try reading card again or replace card. CARD ERROR 53 1. Invalid issuer code. Card does not match i

PR & PR/PD READERS DESCRIPTION Smart Vend PR & PR/PD Readers The Smart Vend PR Reader is a smart card reader that has been devel

READER PROGRAMMING Keys to Successful Programming Programming a PR, PR/PD or SLIM Retro reader successfully relies on having a known good

THE PROGRAMMING CARDS Key Card: Card # 1 The Key Card is always the first card inserted into the reader, PR, PR/PD and SLIM Retro. This

PR & PR/PD READER SETUP PROCEDURE Smart Vend PR & PR/PD Readers The PR & PR/PD Readers can be setup with the same setup card

SLIM RETRO READER SETUP PROCEDURESmart Vend SLIM Retro Readers The SLIM Retro-fit reader needs a special set of setup cards to be setup.

PR & PR/PD READER WIRING Wiring the PR and PR/PD reader to a Maytag machine consists of connecting one wiring harness from the Maytag Circuit Boa

SLIM RETRO DIP SWITCHES AND WIRING Slim Daughter Board DIP Switch Settings DIP-Switch settings for the Maytag CompuTrac2 (PD) Units 1-On, 2-On, 3-On,

BASIC TROUBLESHOOTING PR & PR/PD Reader 1. Check for a Fault Code Displayed on the Maytag Board 2. Test with a User Card 3. Attemp