Maytag AOCS3040 Manual de usuario descargar pdf (Pagina 12)

Amana, Caloric and Modern Maid Fault Codes

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas supply to oven before

servicing, unless testing requires power and/or gas.

SECTION II: AMANA, CALORIC, MODERN MAID

PRODUCT(S): FREE STANDING RANGES, FLORENCE FACILITY, EMPLOYING

GENESIS ELECTRONIC RANGE CONTROL (ERC) WITH “KNOB”

FUNCTIONALITY

MODEL(S): AMANA BRANDS

NOTES: If sensor is “open” before power-up, an F-code will not be generated. Oven will not function.

“Lock” light blinks on power-up for approximately 25 seconds. Control is verifying switch positions.

Oven Temperature Calibration:

1) Ensure “Knob” is in off position.

2) Press and hold arrow buttons until offset temperature displays.

3) Use arrows to adjust temperature up or down +35° to -35° in 5° increments.

NOTES: Offset temperature is retained through power failures.

Gas range must be powered off and back on to accept offset temperature.

Fault

Code

Problem Component(s) to Check

F-1 Control malfunction ...................................................... Verify 120 VAC supply and wiring.

F-2 Oven over temperature ................................................ Ohm sensor, 1100 at room temperature.

If ok, replace control.

F-3 Open or shorted sensor ............................................... Ohm sensor, 1100 at room temperature,

and check wiring.

F-9 Door latch circuit........................................................... Check latch switch, light switch and

associated wiring.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Maytag AOCS3040 Manual de usuario Pagina 12