Maytag AOCS3040 Manual de usuario descargar pdf (Pagina 14)

Amana, Caloric and Modern Maid Fault Codes

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas supply to oven before

servicing, unless testing requires power and/or gas.

PRODUCT(S): FREESTANDING RANGES EMPLOYING GLASS LINK ELECTRONIC

RANGE CONTROL (ERC)

MODEL(S): ACO27SK, ARC700**, ARHC7700**, ARHC8700**, ARTC7600**,

ARTC8500**, ARTC8600**, ZRTC8500**

The ERC is capable of detecting certain failures within the control, temperature sensor and door latch.

NOTE:

Refer to the appropriate Service Manual for detailed service instructions

Fault

Code

Problem Component(s) to Check

N/A DOOR status flashing ..................................................

NOTE: Switch position statuses are displayed in

the Quicktest mode only by touching the CLEAN

pad. Quicktest accessed by touching and holding

“COOK TIME” for 5 seconds within the first 5

minutes of power up.

Door Status:

0 – Both latch switches open.

1 – Unlock switch closed, lock switch open.

2 – Lock switch closed, unlock switch open.

3 – Both latch switches closed.

F0 Loss of safety signal..................................................... Verify glass to adaptor board connections.

If ok, replace adaptor board.

F1 Watch dog circuit problem............................................ Replace Electronic Range Control (ERC).

F2 Oven cavity over temperature ...................................... Check sensor resistance, sensor wiring, and

temperature limiter.

F3 Open sensor or sensor circuit ...................................... Check sensor resistance and wiring.

F4 Shorted sensor or sensor circuit .................................. Check sensor resistance and wiring.

F7 Shorted touch panel ..................................................... Verify glass to adaptor board connection.

If ok, replace glass panel.

F9 Motorized door lock error ............................................. Check latch switch(es).

FF Door motor supervision problem .................................. Check latch switch(es) and door latch motor.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Sin comentarios

Maytag AOCS3040 Manual de usuario Pagina 14