Maytag TOP LOADING WASHER W10338661A Guía de uso y cuidado descargar pdf (Pagina 14)

TROU BLESH OOT[ NG

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service ca[[...In U.S.A. http://www.maytag.com/he[p - In Canada www.maytag.ca

[Dry spots on load High speed spins extract more The high spin speeds combined with air flow during the final

after cycle moisture than traditional top-load spin can cause items near the top of the load to develop dry spots

washers, during the final spin, This is normal,

Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.Incorrect or wrong

wash or rinse

temperatures

Both hoses must be attached to both washer and faucet, and have

both hot and cold water flowing to inlet valve.

Check that inlet valve screens are not dogged.

Remove any kinks in hoses.

Energy-saving controlled wash Energy StarrY'qualified washers use cooler wash and rinse water

temperatures, temperatures than traditional top-load washers. This includes

cooler hot and warm washes.

Load not rinsed Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.

Sand, pet hair, lint,

etc. on load after

washing

Load is tangling

Using too much detergent,

Washer not loaded as recommended.

Not using HE detergent or using too

much H E detergent.

Heavy sand, pet hair, lint, and

detergent or bleach residues may

require additional rinsing.

Washer not loaded as recommended.

Adding detergent on top of load,

Not cleaning or

removing stains

Both hoses must be attached and have water flowing to the inlet

valve,

Both hot and cold water faucets must be on.

inlet valve screens on washer may be clogged,

Remove any kinks in the inlet hose,

The suds from too much detergent can keep washer from operating

correctly. Always measure detergent and follow detergent directions

based on load size and soil [eve[.

The washer is less efficient at rinsing when load is tightly packed.

Load garments in loose heaps evenly around the basket wall. Load

with dry items only,

Use cycle designed for the fabrics being washed,

Add only I or 2 garments after washer has started,

The suds from regular detergent can keep washer from operating

correctly,

Use only HE detergent. Be sure to measure correctly.

Always measure detergent and follow detergent directions based

on load size and soil [eve[.

Add an Extra Rinse to the selected cycle.

See "Using Your Washer" section,

Select a cycle with a slower wash action and spin speed; however,

items will be wetter than those using a higher speed spin, See the

"Cycle Guide" to match your bad with the best cycle,

Load garments in loose heaps evenly around the basket wail,

Reduce tangling by mixing types of bad items, Use the

recommended cycle for the type of garments being washed,

Washer is less efficient at cleaning when load is tightly packed,

Load garments in loose heaps evenly around the basket wail,

Load with dry items only,

Add only 1 or 2 garments after washer has started,

Add HE detergent, oxi products, and color-safe bleach to the

bottom of the basket before adding the load items.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comentarios a estos manuales

Sin comentarios

Maytag TOP LOADING WASHER W10338661A Guía de uso y cuidado Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Lavadoras Maytag TOP LOADING WASHER W10338661A