Maytag MGR4450B Guía de usuario descargar pdf (Pagina 7)

Surface Cooking ....................................

: !i

Surface Controls Setting the Controls

A 1. Place a pan on the burner grate.

CAUTIONS:

• The burner flame may lift off or appear separated

• If flame shouldgo outduringacooking operation, turn from the port if a pan is not placed on the grate.

the burner off. If a stronggas odor is detected, open a

window and wait five minutes before relighting the 2. Push in and turn the knob counterclockwise to the

burner. START setting.

• Be sure all surface controls are set in the OFF position . A clicking (spark) sound will be heard and theburner

will light. (All four ignitors will spark when any

prior to supplying gas to the range.

surface burner knob is turned to the START posi-

tion.)

Pilotless Ignition 3. After the burner lights, turn the knob to the desired

flame size.

Pilotless ignition eliminates the need for a constant standing

pilot light. Each surface burner has a spark ignitor. When • The ignitor will continue to spark until the knob is

cleaning around the surface burneruse care. If cleaning cloth turned past the START position.

should catch the ignitor, it could damage it preventing igni-

tion. Suggested Heat Settings

If the surface burner does not light, check if ignitor is bro- The size and type of cookware will affect the flame

ken, soiled or wet. If clogged, clean the small port beneath setting. For information on cookware and other factors

the ignitor using straight pin. affectingflame settings, refer to"CookingMade Simple".

BU_RNER _

HEAD Setting Uses

Useto bringliquidtoa boil,

HIGH or reach pressurein a

pressurecooker. Always (f____

reducesettingtoa lower

PORTS heatwhen liquidsbegin to

boilor foods begin tocook.

IGNITOR

An intermediateflamesize is used tocontinue

PORTBELOWIGNITOR cooking.Food willnot cookanyfaster whena

higher flamesetting is usedthan needed to

maintain a gentleboil. Waterboils at the same

temperaturewhetherboilinggentlyor vigorously.

Surface Control Knobs Use to simmerfoods,keep_

WARM foods warm andmelt ____._

to turn on the surface burners. An infinite choice of chocolate or butter.

Use

heat settings is available from WARM to HIGH. At the

HIGH setting a detent or notch may be felt. The knobs Operating During a Power Failure

can be set on or between any of the settings.

1. Hold a lighted match to the desired surface burner

Graphics next to the knob identify which burner the knob head.

controls. For example, the graphic below shows the right

2. Push in and turn the control knob slowly to START.

rear burner location. ,llllr'•

,11111',ll[[l' 3. Adjust the flame to the desired level.

ACAUTION: When lighting the surface burners,

be sure all of the controls are in the OFF position.

Strike the match first and hold it in position before

turning the knob to START.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comentarios a estos manuales

Sin comentarios

Maytag MGR4450B Guía de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Cocinas Maytag MGR4450B